Author Topic: which accusump  (Read 411 times)

Offline noslin

  • Full Member
  • ***
  • Posts: 153
    • View Profile
  • Your Best Time: 0.00
  • Your Engine: none
  • Your Track: none
  • Your Vehicle: none
  • General Location: west coast
which accusump
« on: June 07, 2017, 09:03:20 PM »
which accusump to get. there is like six options for the 3qt. 

https://www.cantonracingproducts.com/product/24-006/24-006----ACCUSUMP-3QT-NO-VALVE/


ty
dean

Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 573
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: which accusump
« Reply #1 on: June 08, 2017, 09:48:58 AM »
which accusump to get. there is like six options for the 3qt. 

https://www.cantonracingproducts.com/product/24-006/24-006----ACCUSUMP-3QT-NO-VALVE/


ty
dean
Dean, I'd suggest you calling Canton. And if you could, sharing their recommendation here.

Offline noslin

  • Full Member
  • ***
  • Posts: 153
    • View Profile
  • Your Best Time: 0.00
  • Your Engine: none
  • Your Track: none
  • Your Vehicle: none
  • General Location: west coast
Re: which accusump
« Reply #2 on: June 08, 2017, 03:00:29 PM »
well, messed that whole question up. should of put more thought into it and read tad more.  guess the question could be posed to the valves.

so, two 3 qt accusumps. one is longer and holds more air for higher pressure. so i guess depends on space limitations.   so, keeping it simple it would be the manual ball valve (im guessing).  ill call as suggested as the electric psi ratings has me wondering about manual psi in accusump vs engine oil psi.

ty
dean

Offline dreracecar

  • Hero Member
  • *****
  • Posts: 1483
    • View Profile
  • Your Track: Bakersfield
  • Your Vehicle: 7-0 pro dragster
Re: which accusump
« Reply #3 on: June 08, 2017, 03:04:04 PM »
In over 20 years, never ran one, Milodon oil pan and proof that the gage went to "0" at the chute hit, changed bearings every 3 years during annual rebuild