Author Topic: Throttle pedal?  (Read 8487 times)

Offline Blind Mule

  • Full Member
  • ***
  • Posts: 118
    • View Profile
Throttle pedal?
« on: February 24, 2013, 03:54:17 PM »
What is the most common on a  fed the foot pedal with cable or linkage type? I like linkage but looks like I may not have the room ??? Any pics or ideas on some different applications?

  Randy!

Offline rooman

  • Moderator
  • Hero Member
  • *****
  • Posts: 559
    • View Profile
  • Your Best Time: 6.200/222.05 (1/4 mile--NT/F)
Re: Throttle pedal?
« Reply #1 on: February 25, 2013, 05:26:57 AM »
Randy,
         apart from restorations I usually use a cable deal. That way is is a lot easier to get from the pedal to the throttle arm with just about any induction package. It also makes it easier to change things if the engine combo changes. Don't use the red jacketed Morse cables though as they are not flexible enough. I use the same stuff as the fuel cars, a gray jacketed deal with a spiral wound reinforcement. You can tie knots in them and they still work.

Roo
Yeah, I am from the south--any further south and I would have been a bloody penguin.

Offline Blind Mule

  • Full Member
  • ***
  • Posts: 118
    • View Profile
Re: Throttle pedal?
« Reply #2 on: February 25, 2013, 04:34:19 PM »
Thanks Roo where can I get this type cable setup?

  Randy!

Offline bud

  • Jr. Member
  • **
  • Posts: 83
  • Thanks for the Memories
    • View Profile
    • Buds-Motorsports
  • Your Best Time: 1/4 mile =7.32
  • Your Engine: SBC
  • Your Track: Closed now MAR. KCIR.
  • Your Vehicle: FED,RMD..
Re: Throttle pedal?
« Reply #3 on: February 25, 2013, 07:09:25 PM »
Rooman
ya I have tried the stiff cable and it a battle to force into place, but surpriseing enough the steel cable kit that Speedway has for a few bucks has been the easys for me to work with but for ends on the cable I had to do a little planing for that part. The cable in the picture is the stiff one and very hard to work with.


« Last Edit: February 25, 2013, 07:20:16 PM by bud »
Bud

Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 578
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: Throttle pedal?
« Reply #4 on: February 25, 2013, 08:06:31 PM »
I need to redo some of my cables and I'm considering the Pro-Werks SILVER JACKET Cables:

http://www.pro-werks.com/categories/6466/

I saw them at the IMIS show (Indy) and they seemed quite nice. Anybody here using these?

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2058
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Throttle pedal?
« Reply #5 on: February 25, 2013, 08:34:27 PM »
The cable that Roo Man is talking about is what was used on my Dragster. It is very flexable, but also has another advantage, the end is very small and got through a very small hole.

 

Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline masracingtd1167

  • Hero Member
  • *****
  • Posts: 1138
  • bill masiello Shelton Ct.
    • View Profile
  • Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
  • Your Engine: 394 chevy
  • Your Track: Lebanon Valley Dragway
  • Your Vehicle: 2003 Neil and Parks
Re: Throttle pedal?
« Reply #6 on: February 26, 2013, 02:53:31 PM »
Glen I have been looking for one like that . Do you happen to know who makes them?

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2058
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Throttle pedal?
« Reply #7 on: February 26, 2013, 02:55:48 PM »
Roo Man of Vintage Racing Supply (315) 852 4547 can get them for you
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/