Author Topic: powerglide after market case  (Read 2979 times)

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
powerglide after market case
« on: January 17, 2017, 12:07:13 PM »
Need a aftermarket case for glide,need 2 piece even if its w/o bell.Which no bell would be best as I have a JW bell that bolts to pump and fits hemi that I am running.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline dusterdave173

  • Hero Member
  • *****
  • Posts: 638
    • View Profile
  • Your Best Time: 5.38in 1/8th
  • Your Engine: 355 CI SBC
  • Your Track: Mooresville, NC
  • Your Vehicle: CenPen 200 inch FED
Re: powerglide after market case
« Reply #1 on: January 17, 2017, 03:40:39 PM »
I understand that the Summit house brand is made by Reid or one of the other "good case" guys--I have been told by several just avoid the JW case and you will be happy--it went through lots of issues before they got it straight so that means any on the market could have the curse
I have always had a fascination with fast cars at the expense of more normal character development

Offline masracingtd1167

  • Hero Member
  • *****
  • Posts: 1138
  • bill masiello Shelton Ct.
    • View Profile
  • Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
  • Your Engine: 394 chevy
  • Your Track: Lebanon Valley Dragway
  • Your Vehicle: 2003 Neil and Parks
Re: powerglide after market case
« Reply #2 on: January 22, 2017, 07:09:10 AM »
Most of the problems that I heard about with the JW case were with leaks around the pump but some one who is resourceful like you Chris could figure it out .