Author Topic: NEW MEMBER - AN INTRODUCTION  (Read 1226 times)

Offline THE FRENCHTOWN FLYER

  • Newbie
  • *
  • Posts: 42
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 six banger alt; 8.53@160
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
NEW MEMBER - AN INTRODUCTION
« on: January 13, 2017, 07:31:52 PM »
Hi
I just joined this web site. I hang out on other six based hot rod sites too, so you may have encountered my posts elsewhere. I have been building and racing six-powered cars for decades.
Some of my current rides include:

'23T Altered  - Advanced Chassis - w/ crossflow headed Ford 300 - Super Pro bracket car
'23T Altered - Logghe Chassis - w/ 300 Ford - Nostalgia Comp racer
'30 L.H. steered RPU - my chassis design - w/ 300 Ford
'33 Willys coupe - my chassis design - w/ 300 Ford
'48 Anglia coupe - my chassis design - w/ 240 Ford
'49 Anglia coupe - currently under construction - w/ 300 Ford
'30s era champ car - currently under construction - w/ crossflow headed Ford 300
Jr/D - w/ I-1 for the grandkids
plus some other V8 junk

I look forward to reading and learning more about altereds and drag racing.

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1891
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: NEW MEMBER - AN INTRODUCTION
« Reply #1 on: January 13, 2017, 08:29:17 PM »
Welcome.
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline Pipe Dreams

  • Jr. Member
  • **
  • Posts: 79
    • View Profile
  • Your Best Time: 8.09@165
  • Your Engine: 416 small block MOPAR
  • Your Track: Milan,Mi or Norwalk,Oh
  • Your Vehicle: 170" woody gilmore fed
Re: NEW MEMBER - AN INTRODUCTION
« Reply #2 on: January 14, 2017, 09:11:32 PM »
Glad to see you join in. Welcome.

Offline denverflatheader

  • Full Member
  • ***
  • Posts: 231
    • View Profile
Re: NEW MEMBER - AN INTRODUCTION
« Reply #3 on: January 28, 2017, 08:44:15 AM »
Flyer have read your six cylinder postings before, always accurate data and helpful.  Alan

Offline 300racr

  • Newbie
  • *
  • Posts: 5
    • View Profile
  • Your Track: Wild Horse Pass
  • Your Vehicle: SDRA dragster
Re: NEW MEMBER - AN INTRODUCTION
« Reply #4 on: January 31, 2017, 09:58:20 PM »
Welcome FTF,
Definitely have some cool rides in your stable and very knowledgeable about our beloved Fords.

Offline THE FRENCHTOWN FLYER

  • Newbie
  • *
  • Posts: 42
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 six banger alt; 8.53@160
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
Re: NEW MEMBER - AN INTRODUCTION
« Reply #5 on: February 02, 2017, 07:03:06 PM »
Thank you gentlemen. For those of you who are not familiar with me here are a few pics of some of my junk. Apologies to those who are sick of seeing these shots elsewhere on the interweb.












Offline Roger

  • Full Member
  • ***
  • Posts: 109
    • View Profile
  • Your Track: Midwest Raceway, Manhattan, KS
  • Your Vehicle: 185 inch FED
Re: NEW MEMBER - AN INTRODUCTION
« Reply #6 on: February 02, 2017, 07:07:59 PM »
Oh Ya!!!