« previous next »
Pages: 1 [2]   Go Down

Author Topic: head gasket thickness how much is too much?  (Read 10712 times)

Offline crider

  • Full Member
  • ***
  • Posts: 206
    • View Profile
  • Your Best Time: 5.01
  • Your Engine: BBC
  • Your Track: farmington, Nc
  • Your Vehicle: in progress
  • General Location: south east
Re: head gasket thickness how much is too much?
« Reply #15 on: August 20, 2016, 04:41:31 AM »
I would have never thought it either. In the past I have even fired a couple of engines with just open exhaust ports and they ran fine, but not this one....lol
Logged

Offline 1000hpJohn

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
  • Your Best Time: 8.70/154mph
  • Your Track: Norwalk, Milan Dragway
  • Your Vehicle: 8 sec. ElCamino
Re: head gasket thickness how much is too much?
« Reply #16 on: January 26, 2017, 05:09:46 PM »
Hey guys,

  Got to reading this and thought of my deal with my shorter fender headers I just built.  I also squeezed different head gaskets on it and I couldn't get my BBC to idle either.  Found out that my engine needed more timing since I didn't work my domes like the last set for better flame prop.... soon as I added more timing it took off and idled just fine...with shorter headers and matching ports at the heads, my engine never sounded better! ;D.  Just thought I'd throw that out there...

John
Logged
Pages: 1 [2]   Go Up
« previous next »