Author Topic: Milling OEM 351C Heads  (Read 3178 times)

Offline coupemerc

  • Sr. Member
  • ****
  • Posts: 307
    • View Profile
  • Your Best Time: 3.86@188 (1/8 Mile), 5.97@233 (1/4 Mile)
Milling OEM 351C Heads
« on: December 02, 2016, 06:07:38 PM »
A question for you Ford guys...what would you recommend as a maximum (but safe) amount that a stock cast iron 351C 4V head could be milled to reduce the chamber volume? This would be for drag race only use. Thanks

Offline Frontenginedragsters

  • Full Member
  • ***
  • Posts: 202
    • View Profile
    • Pro-Formance Specialties
Re: Milling OEM 351C Heads
« Reply #1 on: December 03, 2016, 11:44:52 AM »
 Funny you should ask.
I built several 351 Cleveland engines back in the late 1980's.
I assume your talking about 4 barrel closed chamber heads?
We used to angle mill them .125" to zero.
Lots of machine work but a good way to get compression with a flat top piston.
You first have to look at piston to valve clearance to see how much you have.
You can not "un mill" them.

Matt
Driving a Front Engine Dragster builds character and keeps you awake for a 1/4 mile at a time.
http://www.pro-formancespecialties.com/

Offline coupemerc

  • Sr. Member
  • ****
  • Posts: 307
    • View Profile
  • Your Best Time: 3.86@188 (1/8 Mile), 5.97@233 (1/4 Mile)
Re: Milling OEM 351C Heads
« Reply #2 on: December 04, 2016, 05:22:52 AM »
Thank you Matt.  Yes, they would be 4V closed chamber. I'm assuming the .125" number is on the exhaust side of the head. I can see some advantages of doing that. Would the casting get too weak for a max effort head with that much material being removed? Do you know what a maximum but safe number would be for straight milling?

Offline Frontenginedragsters

  • Full Member
  • ***
  • Posts: 202
    • View Profile
    • Pro-Formance Specialties
Re: Milling OEM 351C Heads
« Reply #3 on: December 04, 2016, 11:27:21 AM »
I would like to know more about your Max effort.
Matt
Driving a Front Engine Dragster builds character and keeps you awake for a 1/4 mile at a time.
http://www.pro-formancespecialties.com/