Author Topic: RED cockpit intwerior  (Read 5707 times)

Offline mrmopartech

  • Newbie
  • *
  • Posts: 49
    • View Profile
  • Your Best Time: 8.82 1/4
  • Your Engine: 451 moparRB
  • Your Track: napierville dragway
  • Your Vehicle: 1988 rear engine dragster
  • General Location: montreal quebec eastcoast
RED cockpit intwerior
« on: November 10, 2016, 04:37:57 PM »
Looking for interior ideas for the new digger for a proper looking interior material and what some of you have used before and now,with some pictures to see what some have done,mrmopartech

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2057
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: RED cockpit intwerior
« Reply #1 on: November 10, 2016, 09:02:59 PM »
This is the only interior shot I found when looking for ideas for my build, not sure it fits a RED.

I was going to do this, but turn out not to be enough room and did not want to add the weight.
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

dreracecar

  • Guest
Re: RED cockpit intwerior
« Reply #2 on: November 10, 2016, 09:28:15 PM »
Some classes require the interior material to be nomex

Offline Rusty Kramer

  • Newbie
  • *
  • Posts: 26
    • View Profile
  • Your Best Time: 3.90 @ 185mph 1/8 Mile
  • Your Engine: 472CID KB Olds Blown alky 14-71 HH
  • Your Track: Eddyville Raceway Park Eddyville, Iowa
  • Your Vehicle: Self Build Rear Engine BA/D
  • General Location: Midwest
Re: RED cockpit intwerior
« Reply #3 on: November 15, 2016, 09:36:03 AM »
I would recommend a poured seat set up. Garvin or bald spot. And also memory foam cage padding. ISP type.  Especially if you are building a High HP car that will shake the tires.   I would never drive a car again without them both.  The cage pads will have appropriate cover and the seat kit comes with a sheet of the proper fabric.

Offline mrmopartech

  • Newbie
  • *
  • Posts: 49
    • View Profile
  • Your Best Time: 8.82 1/4
  • Your Engine: 451 moparRB
  • Your Track: napierville dragway
  • Your Vehicle: 1988 rear engine dragster
  • General Location: montreal quebec eastcoast
Re: RED cockpit intwerior
« Reply #4 on: November 16, 2016, 04:18:10 PM »
The cockpit is done.Went to a fabric company and found some vinyl diamond patterned material and did the cockpit and seat and some panels to get rid of the alley look.Looks decent,and is now alot more comfort to sit in now.Now on to the body and paint and other items,mrmopartech

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2057
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: RED cockpit intwerior
« Reply #5 on: November 16, 2016, 04:45:55 PM »
Pictures?
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/