Author Topic: 1962 digger I went to buy(NO sale)  (Read 7487 times)

Offline mrmopartech

  • Newbie
  • *
  • Posts: 49
    • View Profile
  • Your Best Time: 8.82 1/4
  • Your Engine: 451 moparRB
  • Your Track: napierville dragway
  • Your Vehicle: 1988 rear engine dragster
  • General Location: montreal quebec eastcoast
1962 digger I went to buy(NO sale)
« on: October 22, 2016, 07:49:46 PM »
Went to this 1962 digger for a mopar swap and was to small for me,you can stuff 40lbs of crap into  a 10lbs box,does not work even when some one pushes you into it with there feet,mrmopartech     

http://www.kijiji.ca/v-voiture-collection/lanaudiere/dragster-vintage/1198656640?enableSearchNavigationFlag=true



« Last Edit: October 23, 2016, 08:45:06 PM by GlennLever »

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2058
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: 1962 digger I went to buy(NO sale)
« Reply #1 on: October 22, 2016, 08:42:18 PM »
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline mrmopartech

  • Newbie
  • *
  • Posts: 49
    • View Profile
  • Your Best Time: 8.82 1/4
  • Your Engine: 451 moparRB
  • Your Track: napierville dragway
  • Your Vehicle: 1988 rear engine dragster
  • General Location: montreal quebec eastcoast
Re: 1962 digger I went to buy(NO sale)
« Reply #2 on: October 23, 2016, 04:52:29 PM »
I put the proper link to show what I did not buy it,because I am just a little to big and would cost to much to repair a 54 year old car,mrmopartech

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2058
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: 1962 digger I went to buy(NO sale)
« Reply #3 on: October 23, 2016, 08:45:46 PM »
I put the proper link to show what I did not buy it,because I am just a little to big and would cost to much to repair a 54 year old car,mrmopartech

I linked in a couple of the pictures for you.

Glenn
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline mrmopartech

  • Newbie
  • *
  • Posts: 49
    • View Profile
  • Your Best Time: 8.82 1/4
  • Your Engine: 451 moparRB
  • Your Track: napierville dragway
  • Your Vehicle: 1988 rear engine dragster
  • General Location: montreal quebec eastcoast
Re: 1962 digger I went to buy(NO sale)
« Reply #4 on: October 29, 2016, 07:36:12 PM »
Found another digger her in quebec that is a rear engine hard tail unit and is et up for a mopar,big bonus for me as i am a mopar nut.It,s being sold as a rolling chassis,no motor or tranny/glide.So it,s a complete car and possible trailer for under 5000$ canadian/4000$us.So it,s off for a 2.75 hour drive to check out the car and I am bringing cash,so wish me luck,as the owner wants it gone.Scott/mrmopartech

http://www.kijiji.ca/v-autos-camions/ville-de-quebec/1988-dodge-dragster/1132919249?enableSearchNavigationFlag=true

Offline WhiskeyRebel

  • Newbie
  • *
  • Posts: 17
    • View Profile
  • Your Best Time: 10.32
  • Your Engine: Just a baby 355
  • Your Track: Northern Lights Raceway
  • Your Vehicle: 1966 slingshot used to be Double Trouble with twin ford straight sixes
  • General Location: British Columbia, Canada
Re: 1962 digger I went to buy(NO sale)
« Reply #5 on: October 29, 2016, 08:15:16 PM »
There was one for sale in Alberta not long ago. Blown
BBF I think. Turn key for 13,000 I think.

Offline JrFuel Hayden

  • Hero Member
  • *****
  • Posts: 600
    • View Profile
    • Hayden Enterprises Speciality Wheels
  • Your Best Time: 6.02, 236 mph, 1/4 in 1973 Div 3 TF Champ
  • Your Engine: SBC, Alky, 403 ci, Best 6.99 @ 190 & 409 Hemi
  • Your Track: Bakersfield
  • Your Vehicle: 225" FED NHRA Heritage Jr Fuel
Re: 1962 digger I went to buy(NO sale)
« Reply #6 on: October 30, 2016, 09:17:14 AM »
I ran into a racer that killed his motor on the burn-out in Bakersfield and the started banned the racer from the track because he could not get out of the car by himself. Don't buy/ build cars that are too small for the drivers.
Jon C. Hansen

Hayden Wheels

Offline afaulk

  • Full Member
  • ***
  • Posts: 126
    • View Profile
  • Your Best Time: 4.69 @ 145 1/8 mile
  • Your Engine: 370" Blown Alky Chevy
  • Your Track: I-22 Motorsports Park, Eldridge, AL
  • Your Vehicle: 186" Faulkner FED
  • General Location: North Alabama
Re: 1962 digger I went to buy(NO sale)
« Reply #7 on: October 30, 2016, 02:17:56 PM »
I'll bet he could have gotten out if the sucker was on fire. :o

Offline mrmopartech

  • Newbie
  • *
  • Posts: 49
    • View Profile
  • Your Best Time: 8.82 1/4
  • Your Engine: 451 moparRB
  • Your Track: napierville dragway
  • Your Vehicle: 1988 rear engine dragster
  • General Location: montreal quebec eastcoast
Re: 1962 digger I went to buy(NO sale)
« Reply #8 on: October 30, 2016, 03:18:35 PM »
Update on the diger sale.Went to outside of Quebec city to check out the car,3.5 hours of driving ,but we got there,out there in the middle of cow country.the car is in a barn for 2 years,motor and tranny still in it and no body has come to see it.We check out the car,chassis,metal work and al the vital things to check.Thecar is being sold as a roller,pro star funny car rims and the same in the front,all guages and fuel system parts,9 inch ford diff,wilwood brakes,4.56 gears,rear T/F rear wing and front wing on nose cone,21 inch inside frame for the driver,I slip in with no issue,and plenty of room.All the electrics are there,with rad,electric water pump,battery,etc running car minus motor and glide,but will leave the mid plate,as a 452/512 motor goes back in.The whole car for 3800$canadian.Now it,s time to sell al the intakes and carbs and all the rare mopar parts to make room for the neww digger I just bought.Winter is coming and time to clean this car up and set it up for the summer and car shows,Scott Preston/mrmopartech

dreracecar

  • Guest
Re: 1962 digger I went to buy(NO sale)
« Reply #9 on: November 01, 2016, 08:57:06 AM »
Before you do anything, Make sure it has a current SFI chassis tag on it or at least an expired one.(no changes in chassis spec in years) If it does not (never had one) then hold off and have it inspected by NHRA before you buy.Never trust the seller!!!! You may be buying yourself trouble

Offline George

  • Hero Member
  • *****
  • Posts: 518
    • View Profile
  • Your Vehicle: 1964 Mercury Comet Super Stock/ M automatic
  • General Location: Midwest USA
Re: 1962 digger I went to buy(NO sale)
« Reply #10 on: November 01, 2016, 07:00:34 PM »
NEVER trust a seller! A current SFI cert is a must. Unless you are ready to rebuild a chassis.

dreracecar

  • Guest
Re: 1962 digger I went to buy(NO sale)
« Reply #11 on: November 02, 2016, 08:06:54 AM »
NEVER trust a seller! A current SFI cert is a must. Unless you are ready to rebuild a chassis.

 As stated, the SFI cert can be expired, since there have been no changes to it the last 15 years, so it was previously looked at and deamed raceable. Any sale should come with the provision of the frame being able to cert, unless the price is really low and one is buying it for parts. Make the condition of sale the seller provides the new cert or the cert paper listing issues preventing cert. Minor issues like helmet bars can be a negociated, Frame being too thin or too small in dia are a reason to walk away