Author Topic: drag link sopport spacing  (Read 3249 times)

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
drag link sopport spacing
« on: September 03, 2016, 01:27:33 PM »
Is there a rule of thumb as to maximum space between drag link supports..Asking because the middle one in my setup has good amount of space betwee the two supports and wondering if it mught cause issue if get into shake situation.Which yes avoiding shake would be first idea,but crap happens.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline rooman

  • Moderator
  • Hero Member
  • *****
  • Posts: 559
    • View Profile
  • Your Best Time: 6.200/222.05 (1/4 mile--NT/F)
Re: drag link sopport spacing
« Reply #1 on: September 06, 2016, 06:38:41 AM »
The diameter of the link also has an effect. On my longer cars (225") I run a 7/8" link and have also added a center support on that link in some cases.  My '69 Don Long car has a center link that is just shy of 8' long and it is 7/8" diameter.

Roo
Yeah, I am from the south--any further south and I would have been a bloody penguin.

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1910
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: drag link sopport spacing
« Reply #2 on: September 06, 2016, 07:42:58 AM »
Well since mines 3/4" I am gess I need a middle support on 8' link.Thinks Roo Man
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot