Author Topic: shorty glide to std tail shaft  (Read 8661 times)

dreracecar

  • Guest
Re: shorty glide to std tail shaft
« Reply #15 on: September 07, 2016, 08:17:34 AM »
PG used in a dragster should only use the bell housing bolts for attachment and no rear mount, best to let it float

we did this and had nothing but trouble with the coupler binding up.  We now use two turnbuckles threaded into the rear cover down to the chassis rails and adjust then to take some weight off the coupler.

Maybe you should check motor alignment when you have a chance