Author Topic: 454 2pc rear seal block  (Read 2575 times)

Offline alkyal

  • Jr. Member
  • **
  • Posts: 52
    • View Profile
  • Your Track: Quaker City/Dragway 42
  • Your Vehicle: Not a Driver-Nostaliga AA/FD
454 2pc rear seal block
« on: June 24, 2016, 05:15:53 PM »
Have a fresh 454 plus .070 block for sale. It is pressure tested and short poured with Hard Block up to the lowest freeze plug-about 1 1/2 ins. Then cleared for a 4.5 stroke. 3 middle Steel 4 bolt caps [#2-3-4] front and rear are GM stock 2 bolt caps.Then line bored and line hone-Oil pump on #5 cap with a stud. Block was BHJ d on decks to 9.785 and the end rails -.060 F and R. The cyls were bored +065 and plate honed to 4.320 [+.0005/-.0000] Using ARP Bolts and a Cometic Gasket. This was to be a Street Engine, but I got stuck with it. There is a new set of ARP main cap bolts included. Block is in Northeast Ohio. Selling price is 750.00