Author Topic: Chassis print  (Read 4325 times)

Offline beargeorge

  • Newbie
  • *
  • Posts: 30
    • View Profile
  • Your Best Time: 7.48 in 1/4
  • Your Track: New England Dragway
  • Your Vehicle: 23T Altered
Chassis print
« on: April 26, 2016, 07:48:37 AM »
Could someone tell me if the Mark Williams chassis blue print for a funny car chassis is up to date,print #15101 if it is up to date what will it cert for. Thank You.

dreracecar

  • Guest
Re: Chassis print
« Reply #1 on: April 26, 2016, 09:03:05 AM »
Why not call them????
You really should purchase a SFI spec book anyway

Offline rooman

  • Moderator
  • Hero Member
  • *****
  • Posts: 559
    • View Profile
  • Your Best Time: 6.200/222.05 (1/4 mile--NT/F)
Re: Chassis print
« Reply #2 on: April 27, 2016, 05:14:09 AM »
I was out of town yesterday and just catching up. As Bruce notes, don't do anything without the appropriate SFI spec in front of you. A copy of the relevant sanctioning body's rules is also a very good idea as the SFI spec simply spells out the minimum tubing standards and basic layout parameters.

Roo
Yeah, I am from the south--any further south and I would have been a bloody penguin.

Offline beargeorge

  • Newbie
  • *
  • Posts: 30
    • View Profile
  • Your Best Time: 7.48 in 1/4
  • Your Track: New England Dragway
  • Your Vehicle: 23T Altered
Re: Chassis print
« Reply #3 on: April 27, 2016, 11:52:09 AM »
ThankYou for the advice,ordered the SFI deal.