Author Topic: proper placement of fire suppresion nozzles  (Read 3191 times)

Offline up in smoke

  • Newbie
  • *
  • Posts: 25
  • it all smoke and mirrors
    • View Profile
  • Your Best Time: 5.1 @ 128 { 7-25-15}
  • Your Engine: 540 dart crower stacks alky
  • Your Track: empire dragway, leicester ny
  • Your Vehicle: 2014 FED,140" 540ci pg injected on alky
proper placement of fire suppresion nozzles
« on: March 24, 2016, 04:07:31 AM »
is there a standard location of the nozzles for the fire system, running none blown stack injection on alcohol, thanks mike
its all smoke and mirrors

Offline rooman

  • Hero Member
  • *****
  • Posts: 559
    • View Profile
  • Your Best Time: 6.200/222.05 (1/4 mile--NT/F)
Re: proper placement of fire suppresion nozzles
« Reply #1 on: March 24, 2016, 04:25:13 AM »
The usual placement is forward of, or near the front of the motor and the same in the cockpit, relative to the driver. At one time some of the funny car teams were attaching a nozzle to a length of braided line and putting it inside the diaper as that was quite often the root of the fire source. On a blown car with 20lbs of agent I usually put one engine bay nozzle low (for an oil pan fire) and one at the base of the blower. With two cockpit nozzles I aim one at the driver's legs and the other at his torso.

Roo
Yeah, I am from the south--any further south and I would have been a bloody penguin.

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: proper placement of fire suppresion nozzles
« Reply #2 on: April 11, 2016, 08:39:30 PM »
Roo, on a dragster with 20#s, do you suggest two kits independant of each other, or one actuator dumping all 20#s ?

I'm plumbing mine this weekend.
Greg
El Dorado County, CA
www.meansracing.com