Author Topic: Altered driveline shielding  (Read 2598 times)

Offline BK

  • Sr. Member
  • ****
  • Posts: 311
    • View Profile
  • Your Best Time: 8.45 / 5.30
  • Your Track: Empire Dagway
  • Your Vehicle: Late 70's FED
Altered driveline shielding
« on: January 29, 2016, 06:10:01 PM »
I had this in Altered section not sure if it wasn't seen or on one was interested. So I thought I would try here too.
I'm trying to figure out just what is required for driveline covers on my Altered.
The link below should take you to the IHRA rulebook. Page 76 has the driveline requirement. I cant tell if it's saying I need to cover the entire driveshaft or just the u,joints.
The car is an Altered with suspension so the u,joints are required.
I'm not overly concerned about the shaft as it's pretty much overkill for my application, but still want to fit the rules and be safe.
http://www.mydigitalpublication.com/publication/?m=1203&l=1#{"issue_id":285638,"page":76}


dreracecar

  • Guest
Re: Altered driveline shielding
« Reply #1 on: January 30, 2016, 11:30:17 AM »
Call the Tech department for a clarification, not a bunch of wiz-bangs on message boards