Author Topic: Rodeck 481 BBC block info needed  (Read 6570 times)

Offline FEDNV

  • Jr. Member
  • **
  • Posts: 99
    • View Profile
  • Your Best Time: 7.65 @ 175mph - 1/4
  • Your Engine: 560 BBC
  • Your Track: Sacramento
  • Your Vehicle: 185" FED
Rodeck 481 BBC block info needed
« on: December 31, 2015, 06:45:54 AM »
So I have someone local that is selling a Rodeck 481 BBC short block. I really cannot find any info online for these blocks. It has a very wide water pump that is obviously special to this block and it does look to take a BBC oil pan and normal BBC heads.

Does it take a normal BBC timing setup?

It also looks to have spacers for the intake.

Any information is appreciated.



dreracecar

  • Guest
Re: Rodeck 481 BBC block info needed
« Reply #1 on: December 31, 2015, 08:18:07 AM »
If you hurt it, where are you going to find parts for it?

Offline FEDNV

  • Jr. Member
  • **
  • Posts: 99
    • View Profile
  • Your Best Time: 7.65 @ 175mph - 1/4
  • Your Engine: 560 BBC
  • Your Track: Sacramento
  • Your Vehicle: 185" FED
Re: Rodeck 481 BBC block info needed
« Reply #2 on: December 31, 2015, 08:26:46 AM »
That is why I am asking questions as I really do not know anything about these blocks.  I did read on another site these are not made anymore but someone said parts are available, but I have not been able to find anything online about the block or any spare parts.

Offline H.G. Wells

  • Full Member
  • ***
  • Posts: 116
    • View Profile
  • Your Engine: Mild 383 SBC or 498 blown BBC
  • Your Track: Currently San Antonio, past Amarillo, Ardmore OK, Noble OK
  • Your Vehicle: late 60's FED of unknown origin
Re: Rodeck 481 BBC block info needed
« Reply #3 on: December 31, 2015, 10:36:57 AM »
Isn't Rodeck still around?

Address: 2134 Tractor St, Paso Robles, CA 93446
Phone:(805) 237-6040

I know my brother called him about a block a couple years ago. Grumpy old fart, but he did answer the questions.
And he was quick to say that they did not support the old stuff.

Is the one you are looking at a dry sump?
Racecar spelled backwards is racecaR

Offline FEDNV

  • Jr. Member
  • **
  • Posts: 99
    • View Profile
  • Your Best Time: 7.65 @ 175mph - 1/4
  • Your Engine: 560 BBC
  • Your Track: Sacramento
  • Your Vehicle: 185" FED
Re: Rodeck 481 BBC block info needed
« Reply #4 on: December 31, 2015, 11:13:39 AM »
From what I have heard they have now been closed for a few years.  Maybe I will try that number?

The block has a standard oil filter and is a wet sump setup currently.

Here is a link to all the pics of the motor and heads.

https://goo.gl/photos/zBx7wxFGbWzgL8vZ7

Offline Frontenginedragsters

  • Full Member
  • ***
  • Posts: 202
    • View Profile
    • Pro-Formance Specialties
Re: Rodeck 481 BBC block info needed
« Reply #5 on: December 31, 2015, 03:05:58 PM »
 The way I understand things, John Rodeck sold his business to Alan Johnson a few years ago.
I do not know anything about those blocks.
 Matt
Driving a Front Engine Dragster builds character and keeps you awake for a 1/4 mile at a time.
http://www.pro-formancespecialties.com/