Author Topic: 145" Slingshot build in the UK  (Read 32968 times)

Ponti

  • Guest
Re: 145" Slingshot build in the UK
« Reply #15 on: October 21, 2015, 11:12:08 AM »
Well it's here, car has arrived at my house. Now the hard work starts, before returning it for the bodywork at fuel tank build.

Offline JeffV8

  • Sr. Member
  • ****
  • Posts: 266
    • View Profile
  • Your Track: Quaker city
  • Your Vehicle: 164" Woody Gilmore Flexie
Re: 145" Slingshot build in the UK
« Reply #16 on: October 21, 2015, 12:13:35 PM »
👍👍👍👍👍

Offline gasserx

  • Full Member
  • ***
  • Posts: 192
    • View Profile
  • Your Best Time: 1/4 - 9.08
  • Your Track: Gardermoen Raceway
  • Your Vehicle: 180" FED
Re: 145" Slingshot build in the UK
« Reply #17 on: April 18, 2016, 03:22:07 AM »
We need updated pics  :D 8)

Ponti

  • Guest
Re: 145" Slingshot build in the UK
« Reply #18 on: April 22, 2016, 02:41:41 AM »
We need updated pics  :D 8)

 Ok picture update. I don't feel I have made much progress, money has been shorter than I was hoping. I have stripped it back to a bare frame and primed it ( And most of the garage  :o ) . I got hold of a Powerglide and then sourced a shifter, problem was it was a 3 speed. Took me a few days of head scratching to work out how to modify it, but I've managed it, stripped and cleaned it before blowing some Satin Black over it, just need to rebuild it now  ;D .


Offline gasserx

  • Full Member
  • ***
  • Posts: 192
    • View Profile
  • Your Best Time: 1/4 - 9.08
  • Your Track: Gardermoen Raceway
  • Your Vehicle: 180" FED
Re: 145" Slingshot build in the UK
« Reply #19 on: April 25, 2016, 11:27:28 PM »
Thanks for the update Ponti :)
Whats missing to start assembling it?

Ponti

  • Guest
Re: 145" Slingshot build in the UK
« Reply #20 on: April 27, 2016, 09:33:22 AM »
Lots of elbow grease...... Have to paint the chassis, going to be standard style Gloss Black. Clean and paint the steering and front end.  I haven't got any internals for the back axle, but I am going to make a temp axle so I can set it on it's wheels so I can work out backspacing etc for disc's hardware. 

 Then I need funds for engine work and box work  :'(

Offline digster

  • Jr. Member
  • **
  • Posts: 89
    • View Profile
  • Your Best Time: 8.01 1/4
  • Your Engine: Hilborn Injected 427 SBC (Methanol)
  • Your Track: Top End Raceways, Sabin Mn
  • Your Vehicle: 1970 190 inch FED
Re: 145" Slingshot build in the UK
« Reply #21 on: April 27, 2016, 06:42:25 PM »
I wish you were closer Ponti. I'd sure lend you a 9" Ford center.

Ponti

  • Guest
Re: 145" Slingshot build in the UK
« Reply #22 on: April 28, 2016, 03:19:59 AM »
I wish you were closer Ponti. I'd sure lend you a 9" Ford center.

  Thx for that, would have been cool.

 Hardest problem I'm having is finding classic Injection parts to keep the old school theme.

Ponti

  • Guest
Re: 145" Slingshot build in the UK
« Reply #23 on: May 07, 2016, 01:36:56 PM »
Well I have had a productive few days, I have managed to fab a temp rear axle and managed to mount the wheels at the desired spacing from the body.  I have also modified the steering box mount so that the butterfly sits a bit higher, it was just hitting the diff before so no hand room at all.

  Next job is prime and paint the front axle and mounts.

 I am also going to see if some one local can come and have a look at making some padding for my rollcage, and seat.

Offline dusterdave173

  • Hero Member
  • *****
  • Posts: 638
    • View Profile
  • Your Best Time: 5.38in 1/8th
  • Your Engine: 355 CI SBC
  • Your Track: Mooresville, NC
  • Your Vehicle: CenPen 200 inch FED
Re: 145" Slingshot build in the UK
« Reply #24 on: May 07, 2016, 04:26:08 PM »
Alkydiggers in  nashville TN will send you a nice vintage injection set up for reasonable 
Call Mike Chilando  tell him David Kluttz sent you  Guess you will run a SBC? You can get an older unit like a 2 3/16ths hilborn that will work great  I would not go smaller but those work great   Use an enderle 80A-0 pump and you will be set used pumps from Mike are trusty and reasonable $$
Good looking car just hang in there
I have always had a fascination with fast cars at the expense of more normal character development

Ponti

  • Guest
Re: 145" Slingshot build in the UK
« Reply #25 on: May 08, 2016, 12:28:04 AM »
Cheers Dave,

 I'll get a hold of him, my other half is visiting friends in Texas next month so might be able to reduce my shipping costs and get stuff sent there.


Ponti

  • Guest
Re: 145" Slingshot build in the UK
« Reply #26 on: June 09, 2016, 01:07:47 PM »
Well I have been out working on the Ol' girl the last few days. I have managed to make a temp rear axle so I can work out the axle lengths, and get it looking more like a race car. I've primed the parts of my front end, and a few other bits.  I am also working on my powergilde and have had to trial fit it to work out lengths and such, so while I was at it I just HAD to drop a block in, ,oh and maybe a head, rocker cover and intake. lol
« Last Edit: June 09, 2016, 01:09:59 PM by Ponti »

Offline rooman

  • Hero Member
  • *****
  • Posts: 559
    • View Profile
  • Your Best Time: 6.200/222.05 (1/4 mile--NT/F)
Re: 145" Slingshot build in the UK
« Reply #27 on: June 09, 2016, 01:23:10 PM »
Is that a Standard 8/10/Cadet steering box?

Roo
Yeah, I am from the south--any further south and I would have been a bloody penguin.

Ponti

  • Guest
Re: 145" Slingshot build in the UK
« Reply #28 on: June 09, 2016, 01:52:41 PM »
Is that a Standard 8/10/Cadet steering box?

Roo

 TBH I can't be fully sure as a good friend sourced it, but I think it was a Fiat 500, it's a cast alloy case.

Offline rooman

  • Hero Member
  • *****
  • Posts: 559
    • View Profile
  • Your Best Time: 6.200/222.05 (1/4 mile--NT/F)
Re: 145" Slingshot build in the UK
« Reply #29 on: June 09, 2016, 03:19:34 PM »
The Standard has a cast alloy case with four bolts holding the ends in place. It is actually reversible as the internals can be flipped to put the splined end (for the column) at either end of the box. We started using them as they were much lighter than the cast iron Austin A30/35 box and did not have a built in steering column like the BMC box. If you box does not have metric fasteners is is probably the Standard unit.

Roo
Yeah, I am from the south--any further south and I would have been a bloody penguin.