Author Topic: ISO Lenco Reverser  (Read 3639 times)

Offline ss4

  • Jr. Member
  • **
  • Posts: 98
    • View Profile
  • Your Best Time: 5.42 @ 128 - 1/8th
  • Your Track: Northern Michigan Dragway
  • Your Vehicle: Worm Inc. 180 inch Front Engine Dragster
ISO Lenco Reverser
« on: May 13, 2015, 11:36:17 AM »
Anyone have a Lenco Reverser collecting dust on a shelf???  Looking for one to use in a front engine.  Thanks.
if you need to Hate target Laziness

Offline 23T Hemmee

  • Newbie
  • *
  • Posts: 35
    • View Profile
  • Your Best Time: 6.78 @ 196+
  • Your Engine: 557 KB-Veney Blown-alky
  • Your Track: Beech Bend-Bowling Green, KY
  • Your Vehicle: 125" Plueger 23T Altered
Re: ISO Lenco Reverser
« Reply #1 on: May 18, 2015, 01:15:51 PM »
Don't know if you would be interested, but in case you havn't found one, I've got most of the pieces for a CS-2 reverser, needs a Reverser ring gear, a reverser planetary gear and possibly reverser thrust bearing. Replaced this one with a new reverser about 6 years ago with the intention of rebuilding this one for a spare.  Link below from Snyders website shows the pieces needed,  Scroll down most of the way to see the parts needed.  Can send pictures of what I've got.

http://www.snydermotorsports.com/BC/lencopart.htm
Ronny
Mechanical Bull
John 14:6