Author Topic: Introducing my new project.  (Read 10588 times)

Offline tcoupekyle

  • Sr. Member
  • ****
  • Posts: 355
    • View Profile
  • Your Best Time: 4.70 1/8
  • Your Track: Houston Motorsport park
  • Your Vehicle: 225" slip joint FED
  • General Location: Houston
Introducing my new project.
« on: December 05, 2014, 09:04:30 AM »
After much hunting and debating etc etc... I finally found a pretty solid project for my "dragster dreams". I been trolling this forum and I thought I introduce myself and put up a few pictures of my fed. I decided I had to have one after my friends and I put a new motor in Tony Lee's Fed. So here goes... 
« Last Edit: December 05, 2014, 12:37:48 PM by GlennLever »

Offline masracingtd1167

  • Hero Member
  • *****
  • Posts: 1138
  • bill masiello Shelton Ct.
    • View Profile
  • Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
  • Your Engine: 394 chevy
  • Your Track: Lebanon Valley Dragway
  • Your Vehicle: 2003 Neil and Parks
Re: Introducing my new project.
« Reply #1 on: December 06, 2014, 06:35:59 AM »
Looks like a really nice car !

Offline LZ

  • Full Member
  • ***
  • Posts: 210
    • View Profile
  • Your Engine: In progress
  • Your Track: Empire Dragway
  • Your Vehicle: 2010 225" S&W
Re: Introducing my new project.
« Reply #2 on: December 06, 2014, 05:23:09 PM »
Very nice Kyle.  So you going to do SHRA? Nice looking group.
Wish you all the best of fun.

My companies doing site work at Johnson. I have not been put on the rotation yet but if I do will definitely be trying to find out what drag stuffs going on in area. Mighty pick your brain if that's OK?! Only trouble is would possibly only get a Sunday off here and there.

Thanks and good luck
Luke
"I am not a number.... I am a free man."

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2058
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Introducing my new project.
« Reply #3 on: December 06, 2014, 08:14:16 PM »
Very nice Kyle.  So you going to do SHRA? Nice looking group.
Wish you all the best of fun.

My companies doing site work at Johnson. I have not been put on the rotation yet but if I do will definitely be trying to find out what drag stuffs going on in area. Mighty pick your brain if that's OK?! Only trouble is would possibly only get a Sunday off here and there.

Thanks and good luck
Luke

Luke, lets see the item you picked up.
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline tcoupekyle

  • Sr. Member
  • ****
  • Posts: 355
    • View Profile
  • Your Best Time: 4.70 1/8
  • Your Track: Houston Motorsport park
  • Your Vehicle: 225" slip joint FED
  • General Location: Houston
Re: Introducing my new project.
« Reply #4 on: December 08, 2014, 12:07:43 PM »
Yeah definately Luke

Thanks guys!

Offline janjon

  • Full Member
  • ***
  • Posts: 208
    • View Profile
  • Your Best Time: 5.74/124 1/8
  • Your Engine: SB Chev, gas, 350ish
  • Your Track: Houston Motorsports Park
  • Your Vehicle: '65-ish 150" SBC/Glide FED
Re: Introducing my new project.
« Reply #5 on: January 23, 2015, 04:05:49 PM »
So how long 'till you take it down the track at HMP? Never seen a FED there other than mine. Don't know that anyone else has either. Perhaps we can line them up this year???
John
Just keep the same amount of stuff on the right
as there is on the left. Seeing straight ahead is highly overrated....

Offline tcoupekyle

  • Sr. Member
  • ****
  • Posts: 355
    • View Profile
  • Your Best Time: 4.70 1/8
  • Your Track: Houston Motorsport park
  • Your Vehicle: 225" slip joint FED
  • General Location: Houston
Re: Introducing my new project.
« Reply #6 on: April 25, 2016, 05:40:14 PM »
So how long 'till you take it down the track at HMP? Never seen a FED there other than mine. Don't know that anyone else has either. Perhaps we can line them up this year???
John
You have a FED in Houston?  It'll be a while for me but there's another in my car Club that goes out there and tests 60 ft sometimes.

Sent from my SM-G920T using Tapatalk


Offline aafa760

  • Jr. Member
  • **
  • Posts: 83
    • View Profile
  • Your Best Time: 7:02 @ 196
  • Your Engine: Blown BBC 450 BAE 496
  • Your Track: Wild Horse Pass
  • Your Vehicle: 225 Frameworks 7.0 Pro
  • General Location: PHX AZ
Re: Introducing my new project.
« Reply #7 on: May 12, 2016, 12:22:37 PM »
Welcome to the Brotherhood Kyle.

Enjoy the build and the Driving !

Good Luck
Drive it like you stole it!!!


Offline janjon

  • Full Member
  • ***
  • Posts: 208
    • View Profile
  • Your Best Time: 5.74/124 1/8
  • Your Engine: SB Chev, gas, 350ish
  • Your Track: Houston Motorsports Park
  • Your Vehicle: '65-ish 150" SBC/Glide FED
Re: Introducing my new project.
« Reply #8 on: May 12, 2016, 07:04:04 PM »
Just keep the same amount of stuff on the right
as there is on the left. Seeing straight ahead is highly overrated....

Offline tcoupekyle

  • Sr. Member
  • ****
  • Posts: 355
    • View Profile
  • Your Best Time: 4.70 1/8
  • Your Track: Houston Motorsport park
  • Your Vehicle: 225" slip joint FED
  • General Location: Houston
Re: Introducing my new project.
« Reply #9 on: August 15, 2016, 07:27:59 AM »
Killer! Shutdown scares the heck out of me there in the model T