Author Topic: repacking wheel bearings on spindle mount wheels  (Read 3592 times)

Offline hotrodharley

  • Jr. Member
  • **
  • Posts: 81
    • View Profile
  • Your Engine: 540 BBC/12-71 BLOWER/26%OD/PG TRANS/4;10 GEARS
  • Your Track: GOODTIMES DRAG STRIP
  • Your Vehicle: FUEL ALTERED
repacking wheel bearings on spindle mount wheels
« on: November 13, 2014, 02:45:44 PM »
i'm repacking wheel bearings on my altered that has weld spindle mount wheels and M/W spindles;;what is correct way to adjust bearing preload on them?   way I do cars and trucks is I run spindle nut in as tight as can get then back nut off roughly 1/4 turn;;works on street cars and trailers but there don't run 200 mph either;;I won't to do correct on race car;
"DARK SIDE" AA/fuel altered
"BADTOYZZ RACING
SPRING CREEK NV