Author Topic: Velocity Stack Covers  (Read 6427 times)

Offline grapro

  • Jr. Member
  • **
  • Posts: 71
    • View Profile
  • Your Track: edmonton
  • Your Vehicle: 184" FED
Velocity Stack Covers
« on: November 02, 2014, 05:58:35 PM »
I was wondering and looking for someone who makes or sells the tuck and roll covers they used back in the day, I, getting my car ready for our car show and would like to add some to it. Something like in the picture  I added.

Offline RacinJacin

  • Newbie
  • *
  • Posts: 40
    • View Profile
  • Your Best Time: 9.30's
  • Your Track: Thompson
  • Your Vehicle: FED
Re: Velocity Stack Covers
« Reply #1 on: November 02, 2014, 06:56:16 PM »
Seen a guy on Ebay selling them - no connection, but they did look cool.


jacin

dreracecar

  • Guest
Re: Velocity Stack Covers
« Reply #2 on: November 03, 2014, 08:10:33 AM »
No uphostery shops up there????   very simple to make

Offline grapro

  • Jr. Member
  • **
  • Posts: 71
    • View Profile
  • Your Track: edmonton
  • Your Vehicle: 184" FED
Re: Velocity Stack Covers
« Reply #3 on: November 03, 2014, 11:01:59 AM »
I got a couple of quotes up here. Oil rich Alberta's cheapest price was 350 greenbacks .  I was hoping to find something more reasonable.

dreracecar

  • Guest
Re: Velocity Stack Covers
« Reply #4 on: November 03, 2014, 12:51:38 PM »
Trace a cardboard pattern around the top of the stacks and send it to me , Had a whole dragster seat done for $280, should be around $100 on the high side

Offline H.G. Wells

  • Full Member
  • ***
  • Posts: 116
    • View Profile
  • Your Engine: Mild 383 SBC or 498 blown BBC
  • Your Track: Currently San Antonio, past Amarillo, Ardmore OK, Noble OK
  • Your Vehicle: late 60's FED of unknown origin
Re: Velocity Stack Covers
« Reply #5 on: November 04, 2014, 02:29:52 PM »
Wife made mine. Very simple and I bet you could find a local seamstress that would take it on for a few bucks.
Or go to the fabric store and ask around, look at the bulletin board there.

Racecar spelled backwards is racecaR

Offline grapro

  • Jr. Member
  • **
  • Posts: 71
    • View Profile
  • Your Track: edmonton
  • Your Vehicle: 184" FED
Re: Velocity Stack Covers
« Reply #6 on: November 05, 2014, 11:07:52 AM »
Thanks for all the help boys, found someone yesterday who would build it for 80 bucks, going to get it done.