Author Topic: Noise from a Mallory Super Mag?  (Read 4516 times)

Offline Supercat

  • Sr. Member
  • ****
  • Posts: 252
    • View Profile
  • Your Best Time: 6.16 @ 218 1/4
  • Your Track: Bakersfield to Bowling Green to New England dragway
  • Your Vehicle: Buick powered/ 200" Fastech FED
Noise from a Mallory Super Mag?
« on: July 04, 2014, 04:50:54 AM »
We are running a Mallory super mag on our car with the external coil. We fired the car the other day and all worked well,except it seemed to me to make a lot of noise from the mag. Basically a loud whirring sound (somewhat like a card in the spokes of a bike).
This is the first time the mag has been used since it was rebuilt. I am probably being worried for nothing.
Thanks for any input.
John

Offline Spud Miller

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 332
    • View Profile
    • Fuel Injection Ent., LLC
Re: Noise from a Mallory Super Mag?
« Reply #1 on: July 04, 2014, 07:20:48 AM »
Hi John, a mag can be fairly noisy at low speed as it resists turning and then pulls itself around... It hammers back and forth 8 times per rev. If there's a bunch of clearance in the drive connection, it can make a racket. By 2000 rpm or so, it should load in one direction and quiet down. You might look under the cap and just check that things are happy inside.  Spud

Fuel Injection Enterprises, LLC
     Mechanical Injection
     Magnetos
     EFI Conversions

Offline Supercat

  • Sr. Member
  • ****
  • Posts: 252
    • View Profile
  • Your Best Time: 6.16 @ 218 1/4
  • Your Track: Bakersfield to Bowling Green to New England dragway
  • Your Vehicle: Buick powered/ 200" Fastech FED
Re: Noise from a Mallory Super Mag?
« Reply #2 on: July 04, 2014, 07:42:26 AM »
Thank you. I figured I was just being paranoid.
The last mag we used was a small Vertex no noticable noise.
We are going to run the car this weeekend at Orlando Speedworld. It should be fun trying to figure out a starting point for the tune-up. We are used to running around 3500ft elevation vs sea-level.
Thanks again for the help.

dreracecar

  • Guest
Re: Noise from a Mallory Super Mag?
« Reply #3 on: July 04, 2014, 08:52:45 AM »
Another thing to look at is the coupler between the generator and base and weather the plastic one has been changed to a solid aluminum or phenolic.  If you do have the red plastic version you would be wise to buy a spare as I and others have had them crack (its been awhile tho)before.

Offline Supercat

  • Sr. Member
  • ****
  • Posts: 252
    • View Profile
  • Your Best Time: 6.16 @ 218 1/4
  • Your Track: Bakersfield to Bowling Green to New England dragway
  • Your Vehicle: Buick powered/ 200" Fastech FED
Re: Noise from a Mallory Super Mag?
« Reply #4 on: July 04, 2014, 06:12:10 PM »
We have a brand new mag base made by Dunn Services with the nylon drive.
Thanks for the info.
The car is ready to put in the trailer and head over to the track, about 25 miles ;D